BAUER B-NITROX MEMBRANE system B-MEMBRANE
Safety certified by the TÜV: Acceptance testing of BAUER NITROX compressors by the TÜV Süd
Nitrox optimised compressor: Compressor block optimised for high oxygen content and temperature monitoring of all stages for your safety
Oxygen content independent of ambient temperature: Constant cooling of the membrane to ensure optimum efficiency at all times
Small footprint: Screw compressor, refrigeration dryer, filter and membrane unit are installed in a compact housing
B-MEMBRANE is BAUER's nitrox membrane system. This compressor system enriches breathing air with an increased oxygen content of up 40%.
With B-NITROX, BAUER is the only manufacturer in the world to offer a complete nitrox system certified by the TÜV. True to BAUER's uncompromising safety philosophy, all components have been perfectly matched.
The B-NITROX unit has been designed for reliable nitrox supply to stationary, professional diving centres, safari boats, live-aboards, yachts and cruise liners as well as for commercial diving missions.
The legislator has issued clear regulations, as the compression of gases requires a specific degree of tested safety.
This is an important consideration with regard to product liability in the event of accidents (in particular for tour operators and hotels who run diving centres on their sites).
membrane system,
225 bar,
260 – 320 l/min
B-SECURUS filter monitoring
The B-SECURUS system monitors the saturation of the filter cartridge(s) by measuring the moisture in the molecular sieve.
Filling device 4 × 200 bar Nitrox
The filling device consists of four flexible UNIMAM high-pressure filling hoses and one filling valve each for 200 bar according to DIN EN 144-3. The integrated final pressure gauge makes it easy to read off the final pressure on the high-pressure compressor.
P 81 Purification system
When used in conjunction with original BAUER filter cartridges, the P 81 filter system with additional oil and water separator and pressure retention check valve can be relied upon for breathing air treatment conforming to DIN EN 12021:2014¹. A type-tested and sealed final pressure safety valve enables particularly high levels of operational safety to be achieved. 5,200 m³ of air can be treated.
¹ If the units are maintained and installed correctly as described in the user manual and subject to the BAUER AERO-GUARD being used if CO2 concentration in the intake air exceeds prescribed standard values.
© 2020 天津百和通用设备贸易有限公司 版权所有 津ICP备2020009612号
电话：022-59662711 地址：天津市武清区开发区282号 邮箱：baihe022@126.com
